tuning standard 7ht and 7ht turbo

**Dan-arneil** · 08-01-2007, 17:45

Hi

does anyone know any sites that has some handy tips on tuning the 7ht and the turbo.

thanks
Dan

**keith n** · 08-01-2007, 18:50

http://myfishcasting.org/casting_for...&highlight=7ht

**Dan-arneil** · 08-01-2007, 19:03

Hi

i've looked at that before..i'm not cutting my spindle

**cain** · 08-01-2007, 20:10

if you ream or polish the pinion gear it speeds them up.

**keith n** · 08-01-2007, 20:21

Originally Posted by Dan-arneil

Hi

i've looked at that before..i'm not cutting my spindle

i aggree - love my 7ht's far too much to do that (mind you if i can find a cheap one on ebay ..............)
I think that dave h has done it and the reel runs like buggery

**Dan-arneil** · 08-01-2007, 20:55

if i ever come across one thats super cheap then i might give it ago but i am not giving it ago with my fishing reels

**stan the man** · 08-01-2007, 21:45

why would anyone want a reel to run that fast for fishing?

some rocket fuel and small brake blocks with a little end float should suffice,let your casting find the required distance.

**DAVE H** · 08-01-2007, 21:50

I cut the spindle on one of my 7HT
and to make the most of the spin speed it now needs a mag fitting
as it now spins 3 times longer than it did befor the chop job

**Dan-arneil** · 08-01-2007, 23:06

Originally Posted by stan the man

why would anyone want a reel to run that fast for fishing?

some rocket fuel and small brake blocks with a little end float should suffice,let your casting find the required distance.

im not trying to tune it for extra distance as such just trying to tune them specially the 7ht as its sounding abit rough been serviced

**DAVE H** · 08-01-2007, 23:44

take out the bearings wash in lighter fuel
put them on the point of a pen and spin them they should spin free
if not wash out till they are clean if still sticking you have a bearing failing
if not just oil the bearing replace and try again if no joy
you will need to balance the spool .