1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. A NOTE FOR ALL MEMBERS

    You will need to update your bookmarks to be able to visit some sections of the new WSF Forums. If you have bookmarks stored these need to be updated.

    We recommend you go to the WSF Forums Home Page by clicking the link below, remove your bookmarks and then re-add them in.

    WSF Forums: WSF Forums

Schematics for a Daiwa Saltist 30h?

Discussion in 'Tackle & Equipment Discussions' started by Leeder, Nov 29, 2010.

  1. Offline
    Leeder

    Leeder Member

    Joined:
    Sep 10, 2008
    Messages:
    700
    Trophy Points:
    0
    Location:
    Devon
    Does anyone know where I may find a schematic for a Daiwa Salitst 30H, or failing that, does anyone know the part number for the small screw that holds the bearing assembly in on the left hand side plate?

    I managed to round off the head of the screw (it was done up very tightly) when recently removing it, to gain access to the bearing so I could clean it out and oil it.

    I would like to contact Daiwa for a replacement, but obviously need the part number to do so.

    Many thanks for any help you can give me.
  2. Offline
    steveclem

    steveclem Member

    Joined:
    Aug 30, 2007
    Messages:
    302
    Trophy Points:
    26
    Location:
    London
  3. Offline
    Leeder

    Leeder Member

    Joined:
    Sep 10, 2008
    Messages:
    700
    Trophy Points:
    0
    Location:
    Devon
    Didn't think to check the stickies, thanks for your help!
  4. Online
    tatch

    tatch Member

    Joined:
    Oct 2, 2009
    Messages:
    1,236
    Trophy Points:
    56
    Location:
    Yorkshire
  5. Offline
    Leeder

    Leeder Member

    Joined:
    Sep 10, 2008
    Messages:
    700
    Trophy Points:
    0
    Location:
    Devon
    Got the part number now, will phone them in the morning, thanks all.

Share This Page