[fishfearme]

hi all i took my 7ht turbo apart and i normley put it back fine but i dident put all the bits back right and the little bit of metal that goes under/ on the maine gear . i cant put it in the right place and the handle can go backwards and forwards ?????? :nono::nono::nono:

thanks for aby hellp

 

[nicksmith7]

sounds like you haven't put the anti-reverse back on correctly, i did the same first time i stripped my 7ht down.

 

[fishfearme]

sounds like you haven't put the anti-reverse back on correctly, i did the same first time i stripped my 7ht down.

yes m8 thats what iv done how hard is it to put back ???

 

[nicksmith7]

pretty straight forward the anti reverse piece fits onto a peg and then fits either side of the main cog. i'll try and find a link to the diagram.

 

[nicksmith7]

http://www.mikesreelrepair.com/schematics/displayimage.php?album=search&cat=0&pos=0
i can only find the schematics off mikes reels but it doesn't show how to put the pieces back on, if your still struggling i'll take a picture of my 7ht to show you how it should fit