World Sea Fishing Forums banner

1 - 12 of 12 Posts

·
Registered
Joined
·
31 Posts
Discussion Starter #1
anyone use berkely fireline ?
What is it like?
also i understand it is fused not braided what does this mean and what difference does it make ?

any help would be great thanks..
 

·
Registered
Joined
·
5,557 Posts
Tried it, don't like it. It is fused braid, I am guessing but it looks like it is heated to fuse it and this makes it stiff and flat. It does not stand up well to abrasion IMHO. Take a look at PowerPro braid if you can find some. Nice fine diameter, round cross section and tough as old boots. I have tried all sorts and to me PowerPro is a mile ahead of them.
 

·
Registered
Joined
·
1,257 Posts
Hi ChrisP,

Likewise as above. I have tried it and found it useless, not nearly as good as Whiplash or Roger Bayzands own brand.

I've seen lots of it tried and thrown away. (not in the sea) It is like fishing with a reel full of plastic twine.

Cheers

Drew
 

·
Registered
Joined
·
4,862 Posts
Using 10lb for spinning and floatfishing. Finding it great and a huge improvement on the limp blue dynema type I used to use. (now using this in the garden to frighten sparrows!) More direct when spinning and plugging and very thin for light floats. No real problem yet but time may well tell.

The really good stuff is the XDS! I use 35lb to fish really rough ground. Instant contact and wears a lot less than mono in my experience. Mind you I always replace the end foot or so every time I fish. Abrasion, when it happens, is instantly obvious as the dark green is replaced by a light worn surface and you notice it as you wind in, particularly if you've just had a tug-of-war! Has all the obvious advantage of all braids in its lack of stretch and thin diameter. I have pathetic casting technique with multiplier but have found the 35lb easier to cast than 15lb mono! Could it be the increased friction of the 'sticky' braid slows things down for me?? Can't see me going back to mono.

Lighter breaking strains, down to 10lb in the XDS are almost in the shops so I've been told! I'm paying £20 for 300yds.
 
G

·
Guest
Joined
·
0 Posts
been useing fire line since it came out, tried others but fireline i find the best, if you get tangled with a fellow angler it comes out easy not like whiplash that resembles limp spag! and gets in hook eyes, inbetween swivelspiral, sure fireline is not cheap but well worth the extra,
 

·
Registered
Joined
·
16 Posts
As with Grahame i have been using FireLine 4 ages now ! bassing with live Sand eel off the boat. No obvious probs.Great to get out of tangles ,and as i fish the reef off Worms head (Gower) Abrasion resistance seems to be brill with no lost fish because of it breaking!
 

·
Registered
Joined
·
1,257 Posts
Hi Folks,

This is why this forum is so good, you sure get a difference of opinions. Our likes and dislikes are voiced for all to see.

Incidently I have a reel full of brand new fireline on my TLD 20 that I am to mean to throw away, still think it is useless.

Cheers

Drew
 

·
Registered
Joined
·
12,181 Posts
Sam! I hope you are not one of the "fishmongers" that haunt the Worm early morning, every morning, from April to Oct, like a bunch of cormorants, waiting for the shoal to show!
Last time I fished the Worm, there were almost as many Shetlands & Alaska's as there were bass!
blueskip
 

·
Registered
Joined
·
193 Posts
funny the variations in assesment.

I have it on multipliers in 14, 20 & 35 and whilst I like it for downtiding I don't really appreciate it's wiry qualities when casting (uptiding). suspct it would be good on spinning gear. only have xds in a heavier 50lb and whilst it's nice to handle and abrasion resistant (proof?) it is pretty thick stuff.

others I have on reels currently - Ron Thompson Dynacable - great;tight round shape and a good balance between wiry and limp.
Suffix (a green wound coating on white threads) - the coating breaks and, whilst it probably doesn't detract from the strength it desn't give you confidence - also a bit bulky.
Dynon etc - great for downtiding as so thin........bit of a problem if it gets tangled.
 

·
Registered
Joined
·
4,862 Posts
Just bought the 17lb XDS which I intend to use for 'light' ledgering and freelining on my method feeder rod. This breaking strain is so thin for a 'smooth' braid that I think it might become my basic line as it will have some strength to pull out of snags.
Going to use the heavier 'old' soft style braid as flyline backing!

However my small fxd. spool and baitcaster have the 7lb Fireline and I've bought it now!
 

·
Registered
Joined
·
1,257 Posts
Hi Swelley,

Keep us informed.

Cheers

Drew
 

·
Registered
Joined
·
437 Posts
Av A Read Lads .


FireLine Tips


The following are some tips and ideas to help answer questions on FireLine.
Fire Line Facts: FireLine is a thermal filament fishing line, NOT a mono and NOT a braid. It is made from MICRO Dyneema, the world's strongest fiber. It a lot of small fibers bonded together to deliver the best HIGH PERFORMANCE LINE ever developed!

It's smaller diameter per pound test, compared to mono, allows for the angler to use a more powerful presentation without giving up the features and benefits of small line. It is not a replacement for mono in all-fishing situations.

FireLine delivers longer and more controllable casts than mono or braids of the same pound test. Since it has very low sustained memory it comes off your reel faster and with less friction giving better casting distance. The smaller diameter is not affected by the wind as much thus giving the angler better control of the lure and improving its accuracy.

The small diameter of FireLine gives lures better diving depth and also improves the actions of most lures. For live bait it makes for a more natural presentation. The added sensitivity allows the angler to feel the softest pick-up.

As your experience with FireLine increases, and you understand the compromise between stretch and sensitivity you will be able to fish FireLine in more and more situations. Think of FireLine as an ultra high performance sports car and you will understand why high performance is a product of compromises; the sports car goes fast, corners hard, but can't carry six people and the groceries, so you have compromised. FireLine is a product for ultra high performance fishing. It offers the ultimate in long casting distances, sensitivity and thin diameter, but doesn't provide the shock resistance that a monofilament does. The low stretch of FireLine means solid hook sets at any distance. You don't have to rear back and "cross their eyes." As they say down south, "just a solid pull will drive the hook home!"

Reels: CASTING: The best FireLine for casting is the 14 lb. Test and up. Even with 14lb. Or larger the small diameter should e taken into consideration when adjusting the reel and choosing a lure. A good way to start out with FireLine is to increase your spool tension or magnet control, this will slow down the line coming off the reel. You will find that FireLine comes off faster and smoother than mono or braids and will deliver increased distance even with more spool tension. If the spool is too loose you will have some over runs that can snap lures off very quickly in the casting motion. It is not necessary to cast harder to get more distance. In fact, a smooth casting motion will deliver the best distance.

SPINNING REELS: All pound tests of FireLine work will on spinning reels; with 6,10 and 14 being the best. The line lays of the reels very well yet comes off quickly in a cast to give added distance.

SPINCAST REELS (CLOSED FACE REELS): FireLine WILL NOT WORK well on spincast reels.

Attaching FireLine to your reel: Since FireLine has almost no stretch it must be ties as well as taped to a reel arbor to prevent slippage. The Berkley tape tab on the end of your FireLine fits this need very well. Simply tie FireLine onto the arbor of your reel and place the tape tab over it. Another way would be to use a mono backing since FireLine's small diameter makes it hard to fill most reels with a 125 yard spool. You may want o use a blood knot or a nail knot to attach the FireLine to monofilament.

Knots to use: FireLine works with regular fishing knots. The best and recommended knot is that Palomar, which delivers 100% of rated strength when used with FireLine. Knots that rely on wraps for strength, such as the Trilene knot, need to have at least six wraps to avoid slippage and leave ½ to ¾ inch tag end.

Rod recommendation: Since FireLine has low stretch you can use a softer action rod that is easier and more fun to cast and use. You no longer need a real heavy rod to deliver the power to your hands. The power is in the line! Rods with more flex will fight the fish more effectively and wear them down. When the fish gets close to the boat it is important to have your drag adjusted to allow for big fish to take the line.

What to Expect: As you use FireLine the color will fade to a smoke gray, this is normal. Micro Dyneema does not absorb dye; you can use a permanent black magic marker to color the line (make sure to let it dry!).
 
1 - 12 of 12 Posts
Top