World Sea Fishing Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
641 Posts
Discussion Starter · #1 ·
Hi guys looking for some help.
During the season a roller jammed and as boat was winched on to trailer, this left a"tyre mark" on the hull.
Cleaning boat today and wondering how to remove this mark.
Any ideas how to remove?
 

·
Registered
Joined
·
201 Posts
Hi guys looking for some help.
During the season a roller jammed and as boat was winched on to trailer, this left a"tyre mark" on the hull.
Cleaning boat today and wondering how to remove this mark.
Any ideas how to remove?
If using the Farecla G3 Compound doesn't get rid of it then lightly abraid it with some 1200 wet 'n' dry, then use the g3 compound to remove the light scratches and if your one of those guys with an amazingly shiny boat then apply some G10 aswell to give a real mirror finish
 

·
Registered
Joined
·
641 Posts
Discussion Starter · #4 ·
If using the Farecla G3 Compound doesn't get rid of it then lightly abraid it with some 1200 wet 'n' dry, then use the g3 compound to remove the light scratches and if your one of those guys with an amazingly shiny boat then apply some G10 aswell to give a real mirror finish
Thanks guys, the only shiny bit on my boat is on the top of my head.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top