World Sea Fishing Forums banner

Lead weight moulds

914 Views 17 Replies 14 Participants Last post by  tournamag
Hi i have posted this in the tackle section as well but thought I would look locally first.
I am looking for some lead moulds for making various size beach weights I am happy to buy a job lot if anyone has some they want to sell I have money waiting
Regards Billy
1 - 18 of 18 Posts
You can buy Gemini mounds in plenty of tackle shops that make weights 3oz up to 8oz. John
As suggested allready there are loads on Ebay,what might be more difficult is finding a supply of free lead,it might not be worth the effort if you have to buy it.I was lucky to "obtain" a few cwt's for a packet of duty free tobacco 10 years back and still have enough to last my fishing life!
Hi i have posted this in the tackle section as well but thought I would look locally first.
I am looking for some lead moulds for making various size beach weights I am happy to buy a job lot if anyone has some they want to sell I have money waiting
Regards Billy
You can buy 12 gripper weights from 5,6,7,8,oz for £12 post free online at Ebay but watch wat wire they put into weight as i bought some soft. so bought some toughened wire and changed them. Been great since plus less work m8. Happy hunting be safe
Hi i have posted this in the tackle section as well but thought I would look locally first.
I am looking for some lead moulds for making various size beach weights I am happy to buy a job lot if anyone has some they want to sell I have money waiting
Regards Billy
Ebay do lead moulds
Also cheap leads 10 or 12 for around £ 10 free post
Or message dustybin on here he's great value in bulk , but if your going to buy a mould the Gemini is good because as said above one mould does a range of lead sizes
Have a look at the namix bullet moulds on eBay (very good moulds)
Care when melting lead make sure it is dry, water and lead don't mix
Care when melting lead make sure it is dry, water and lead don't mix
or it will be a trip to the hospital.not good anyday.
Billy,
You have channel angling, and the guy next door to him along the front (Snargate street), they both do moulds of different types.
Save you on postage as well
Rob
Hi i have posted this in the tackle section as well but thought I would look locally first.
I am looking for some lead moulds for making various size beach weights I am happy to buy a job lot if anyone has some they want to sell I have money waiting
Regards Billy
GREGG you marked this post as optimistic why

hi billy
i can supply 7oz extra grip namix leads proper 18gauge stainless steel wire
quality lead loops
i dont do built in hook clips
2
The Adjustimould does 3 to 9 ounce with and without fixed side wires
Possibly not the most fashionable shape but it casts well enough (for me) and holds bottom like a mole grip
For the wires, if you can get hold of some, try 1.6mm stainless steel tying wire, it is softish, holds well and bends out easily if stuck

Typically https://bsfixings.uk/stainless-steel-lacing-wire or speak to your local steel fixer

Rectangle Automotive exterior Font Metal Auto part

Attachments

See less See more
Adjusimould casts 3 to 9oz with or without fixed grip side wires that you have to supply and bend yourself. No problem if you can lay hands on 1.6mm soft stainless steel tying wire which can also be used for lead loops.


t View attachment 320258
billy this might be what your looking for
i carnt sell at this price


50 weights and 100 grip wires if you want rollers you can buy the manufactured ones or I use cotton buds the ones with the plastic tube [ASDA little angels] works out at about 0.17p a lead so youre making up about 6 leads for a penny they are also slightly thinner than bought ones and gives you extra grip £30 posted cheers Ian 07866805602
billy this might be what your looking for
i carnt sell at this price
Was just going to say about that lot!
1 - 18 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top