World Sea Fishing Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
585 Posts
i use a camping stove and sauce pan to melt, pre heat the molds on the second ring. welding gloves and clamps to handle moulds and a laddle to pour the lead. pour a couple of leads with out wire to check the mould is hot enough then start using the wire. do it outside but not in a wind tunnel or when rain is coming. i use several moulds at once so im constantly pouring and the moulds stay hot and im not waiting for the lead to set. an old tin is handy for the slag that gathers on top of the lead.
hope that helps
 
1 - 5 of 5 Posts
Top