World Sea Fishing Forums banner
1 - 2 of 2 Posts

·
Wales Team Captain
Joined
·
2,361 Posts
hi the generator is about £7.50-£9 depending on where you get them most tackle shops stock coleman spares.The job is fairly simple but can be a bit fiddly,first you need to realse any pressure in the tank then take the top of the lamp of and remove the glass globe,remove the heat shield to get access to the locking nut on the genny,undo this and lift the genny upwards so you can seperate the needle shaft from the valve stem (sounds complicated but it is straight forward) once this is done turn the valve full on and this will allow you room to remove the genny,fitting is just a simple reverse operation.you will probablty neen a new set of mantles as they tend to fall to bits when you first attempt this.
I managed to make it sound like a nightmare but its not that bad honest. :)
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top