World Sea Fishing Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
44 Posts
Discussion Starter #1
Hi Guys,

I have Simrad NSE 12 i try to update.

Downloaded the 4.0 update from the Simrad site.

Put it on a USB stick.

Start the update.

And now im stuck with a black screen and blinking bar.

What do i have to do now? The manual say's not to remove the power.

Thanks, Stefan From the Netherlands
 

·
Banned
Joined
·
2,660 Posts
Hi Stefan - welcome to the forum. :thumbsup:

Best option would probably be to contact Simrad (Navico) themselves and see what they suggest. They may have come across this issue before and can advise on a safe resolution.
 

·
Registered
Joined
·
1,397 Posts
Stefan
I had it when I had my nse12, I cut the power, powered up and did the updates from sd card.
I’m not saying do it and as mentioned maybe talk to navico about it first, but it worked for me.
After you you update do a hard/ factory reset prior to using it.
Press and hold zoom in & out buttons, press power on while holding in/out, when you hear a beep release in/out. I assume you have backed up your settings and waypoints.

Best of luck
Paul
 
1 - 3 of 3 Posts
Top