World Sea Fishing Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
689 Posts
Discussion Starter · #1 ·
hi lads and lasses worn slack joints on grey 16ft triplex can any one suggest the best build up spay to use cheers.bob
 

·
Registered
Joined
·
3,008 Posts
Maver graphite spray worked for me on a Century TT.

Clean the surface with a rag dampened with meths first - to remove any grease. Then give a very light spray and give it time to dry.

Work the joint together slowly to lap (wear) the surfaces together.
If still slack give a second coat and repeat the procedure.

Done properly it seems better than new.

Bought mine from an Ebay shop.
 

·
Registered
Joined
·
417 Posts
I use MAP graphite spray, it's for pole sections but it cost me a fiver about 4 years ago and it's done about 6 rod joints with plenty spare left in the can :thumbs:
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top